Repeaters

Extend range and overcome signal obstructions to ensure reliable communication between multiple locations or a single site. Features vary from integrated data applications to analog-digital migration capabilities.

XPR™ 8400 / XPR 8380 REPEATER

Maximize the performance of your UHF, VHF or 800/900 MHz MOTOTRBO system with these repeaters.

Features At-A-Glance

• 100% continuous duty at 40W/UHF, 45W/VHF and 35W/800 MHz.
• Supports two simultaneous voice or data paths in digital TDMA mode.
• Integrated power supply with connector for optional external DC battery backup.
• Operates in analog or digital mode – bright, clear, colored LE Ds indicate mode.
• LED's clearly indicate transmit and receive modes in both channel slots.
• Rack- or wall-mountable – compatible with desktop housing as well.
• Sturdy handles make installation and handling easier.

Additional Features

• Automated battery back-up (battery sold separately)
• Operates in UHF, VHF or 800/900 MHz frequency bands
• 6.25e Compliant*
• Dynamic mixed mode capability allows for automatic switching between analog and digital conventional modes
• Repeater diagnostic and control software provides remote or local site monitoring
• IP repeater programming uses Internet Protocol (IP) at a central location to complete programming changes and upgrades on remotely located repeaters

Brochures

MOTOTRBO System Brochure
MOTOTRBO Connect Plus Brochure
MOTOTRBO Repeater Spec Sheet

Motorola MTR3000™ REPEATER

100-watt continuous duty station that can operate on MOTOTRBO digital systems as well as analog conventional and LTR/PassPort trunked systems.

Features At-A-Glance

• 100% continuous duty cycle (Integrated 100W Power Amp)
• Supports two simultaneous voice or data paths in digital TDMA mode with 16 channels*
• Operates in UHF, VHF or 800/900 MHz frequency bands
• Integrated AC /DC power supply
• Operates in analog or digital mode
• LED's clearly indicate transmit and receive modes and overall station status
• Rack-or-cabinet mountable
• Front access speaker port for serviceability ease
• Front access microphone port for routine service
• Standard USB port for station configuration

Additional Features

• Convenient access to station ports, shortening installation and maintenance time
• 12.5 or 25 kHz programmable channel spacing
• 6.25e Compliant*
• Integrated 100W Power Amplifier and AC /DC Power Supply minimizes cabling, rack space, expense, and overall complexity
• Software based design simplifies feature upgrades
• Power supply functions over a wide range of voltages
• Automated battery back-up (charger sold separately)
• Restriction of Hazardous Substances (RoHS) compliant
• Repeater diagnostic and control software provides remote or local site monitoring
• Dynamic mixed mode capability allows for automatic switching between analog and digital conventional modes
• IP repeater programming uses Internet Protocol (IP) at a central location to complete programming changes and upgrades on remotely located repeaters

MOTOTRBO System Spec Sheet
Motorola MTR3000 Spec Sheet
MOTOTRBO Repeater Spec Sheet

• Home |
• Products |
• Services |
• Rentals |
• Wide-Area Dispatch |
• Public Safety Solutions |
• About Us |
• Contact Us |
• Site Map

© Columbus Communications Inc., Inc. All Rights Reserved
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC
and are used under license. All other trademarks are the property of their respective owners. © Motorola Solutions, Inc. All rights reserved.